CueStrideSign up free

Free template

Free run of show template

A morning general session, minute by minute, with the sound, video, and lighting cues beside each segment. Change it to your show, and the same file imports into CueStride as a rundown of timers.

Both are CSV files that open in Excel, Google Sheets, and Numbers. No sign-up needed.

The basics

What a run of show is

A run of show is an event's plan minute by minute, with one row for each moment the room changes. The producer writes it. The show caller calls the cues from it. The stage manager runs the stage by it. The sound, video, and lighting operators set their desks from it.

An agenda is for the audience. It says what happens and roughly when. A run of show is for the crew. It says when each moment starts, how long it runs, who is on stage, and what every department does.

A cue sheet is narrower again. It lists one department's cues by number, such as every lighting change. On a show this size the cues fit in the run of show's own columns, as they do here.

An example

A morning general session, 08:30 to 11:00

11 segments, from doors to walk-out. Each start is the start above it plus that row's length, so the times add up.

StartDuration (min)SegmentPresenterAudioVideoLightingNotes
08:3030Doors and walk-inWalk-in playlistHolding slide with the event logoHouse lights full, stage wash at 50%Ushers at every door; front row reserved for speakers
09:002Housekeeping announcementAnnouncerFade the walk-in music; booth mic liveExits, Wi-Fi, and phones on silentHouse lights to halfRecorded announcement ready if the booth mic fails
09:023Opening videoPlayback audio to the PAPlay the opener full screenHouse lights out, stage darkShow caller counts down from five on headset
09:055WelcomeHostWalk-up music, then the host's headset micEvent logo, then the host's name as a lower thirdStage wash full, follow spot on the hostHost enters from stage left
09:1030Opening keynoteKeynote speakerHeadset mic, lectern mic as backupSpeaker's slides from the lectern laptop on HDMI 1Lectern special upClicker on the lectern; five-minute warning on the confidence monitor
09:403Handover to the panelHostHost's mic on, keynote mics offPanel title slideStage wash fullCrew sets four chairs and two handhelds
09:4332Panel discussionPanel moderatorModerator's headset and two handheldsEach panellist's name as they speakWarm wash on the chairsQuestions from the aisle mic for the last ten minutes
10:1520Coffee breakBreak playlistCountdown to the next sessionHouse lights fullReset the lectern for the demo
10:3515Product demoProduct leadHeadset mic; demo laptop audio to the PADemo laptop on HDMI 2Stage wash full, screen area dimmedRecorded demo on the playback machine as backup
10:507Closing remarksHostHost's headset mic; outro music at the endThank-you slide with the afternoon's sessionsStage wash full, house lights up at the endHard out, so the room can turn over for lunch
10:573Walk-outWalk-out playlistHolding slide with the lunch room's directionsHouse lights fullDoors to the lunch area open

The columns

What each column is for

5 of the run of show's 8 columns go into CueStride. Audio, Video, and Lighting are for your crew and stay in the sheet.

The run of show

ColumnWhat it is forIn CueStride
StartWhen the segment begins, on a 24-hour clock.The timer's start
Duration (min)How long the segment runs, in whole minutes.Its length
SegmentWhat happens, in the words the crew uses on headset.Its name
PresenterWho is on stage or on the mic, by role until the names are confirmed.The speaker on the screens
AudioThe sound desk's cue: which mics are live, and what music or playback runs.Not imported; stays in the sheet
VideoWhat the screens show: slides, playback, cameras, or names.Not imported; stays in the sheet
LightingThe lighting state for the segment.Not imported; stays in the sheet
NotesWhat else the crew needs: stage moves, props, backups, and hard outs.Its notes, never shown on the screens

The conference programme

One day in two rooms, with parallel sessions, a coffee break, and lunch. Every column goes into CueStride.

ColumnWhat it is forIn CueStride
DayThe session's date, as 2027-04-15.The timer's day
RoomThe room or stage, by its name in CueStride, or a new name for a new room.The room it goes in
StartThe printed start, in the event's time zone.The timer's start
Length (min)How long the session runs, in minutes.Its length
TitleThe session's name, as attendees read it.Its name
SpeakerWho leads it.The speaker

Tips

How to fill it in

  • One row for each change

    Start a new row whenever the room changes: a new person on stage, a video, a break, a lighting state that matters. If a moment has its own cue, it gets its own row.

  • Lengths, not only starts

    Write how long each segment runs. Starts say when; lengths say what to cut when the keynote runs over. Each start should be the start above it plus that row's length.

  • Transitions are rows too

    Walk-ups, handovers, and changeovers take real time. Give each a row of two or three minutes, or the show loses that much at every handover.

  • Mark the hard outs

    Some times cannot move: a livestream slot, the venue's curfew, lunch served at noon. Write "Hard out" in the notes of the segment that has to end on time, and decide in advance what you cut to make it.

  • One column for each department

    Sound, video, and lighting each read their own column. Add one for stage management or captions if they need it, and keep each column to what that desk does.

  • One shared copy

    Keep a single copy everyone edits, such as one Google Sheet, and print it only once it is final. Two copies on the day will disagree.

In CueStride

Run the show from it

Save the sheet as CSV and import it into a CueStride room. Each row becomes a timer, with the segment as its name, the presenter as its speaker, and its start, length, and notes. The preview lists Audio, Video, and Lighting as not imported, and they stay in your sheet.

The import asks which day the show is on, and whether the starts start their timers on their own or only keep their times. You see each row as the timer it becomes before anything changes. Set the room's time zone first, since the starts are read in it.

Import a rundown into Keynote hall, with Product Summit rundown.csv chosen. It shows the columns it took: Title, Length (min), Start, Speaker, and Notes. Start on their own and Add to the rundown are chosen. Seven rows follow, from Doors and coffee at 09:00 to Lunch at 12:00, and the Import button counts them.

Importing a rundown into a room is on Pro and up. Every plan downloads a room's rundown as CSV, so the show goes back into your spreadsheet afterwards.

The rundown of a keynote hall in day sections. Wednesday has four timers, with the opening keynote marked Live and the product roadmap marked Next and Linked. Thursday has the closing, and an undated section has a rehearsal slot. The last row adds the next timer.

The conference programme

The programme imports into an event in one step. Each row becomes a timer in its room, on its day. A room the sheet names that your account does not have yet is created. The programme import belongs to events, which are on Premium and up.

Change the Day column to your event's date. The programme import reads 2027-04-15, and day-first dates such as 15/04/2027, but not month-first ones. If your spreadsheet shows 4/15/2027, give the column a yyyy-mm-dd date format before you save the CSV.

Your next show, on time.

Put a room's link on a screen and run the show; sign up free when you want to keep it.